Janome 3622S, Instruction Book

Page: 64 / 72

62
Sewing Light
The sewing light is located behind the face plate.
To change the bulb, take the face plate off the
sewing machine by removing the setscrew.
(A) To remove Turn to the left.
To replace Turn to the right.
(B) To remove Push and twist to the left.
To replace Push and twist to the right.
(A) (B)
WARNING:
The bulb could be HOT. Protect your fingers
when handling it.
Oil the Machine
Oil the points as shown at least once a year.
Use good quality sewing machine oil.
One or two drops of oil is sufficient.
Remove excess oil, otherwise it may stain fabric.
In case machine is not used for an extended time,
oil it before sewing.
Oil behind the face plate
Remove the screw and face plate.
Oil the point as indicated in the illustration.
q
Screw
w
Face plate
Oil behind the shuttle hook area
Open the hook cover.
Remove the shuttle race ring and shuttle.
Oil the point as indicated in the illustration.
e
Hook cover
r
Shuttle race ring
t
Shuttle
q
w
r
t
e
CAUTION:
Turn off the power switch and/or unplug the
machine before oiling the machine.
CAUTION:
• Unplug the power supply before changing the
bulb.
• Do not dismantle the machine other than
explained in this manual.