Page 17
= Peak value
= Minimum value
= Supply
Voltage transformer
Only voltages with a secondary voltage, which is marked on type
plate of the UMG 96, can be connected.
Type plate
Input voltage UMG96
UMG96
L-L (Secondary voltage)
196 .. 275V
400V
(Standard version)
98 .. 140V
220V
und
200V
(Option)
49 .. 76V
110V
und
100V
(Option)
As secondary and primary voltage, the
phase to phase voltage (L/L)
is given in the display of UMG96. When the device leaves our factory,
the primary voltage is set the same as the secondary voltage. This
means a transformer ratio of 1:1.
In programming mode, the voltage transformer is marked with the
symbol „
VT
“.
Programming
In programming mode, please scroll to the voltage transformer setting
by pressing key 2. Confirm with key 1.
The first cipher of the primary voltage is flashing and can be chan-
ged by pressing key 2. If you confirm with key 1, the next cipher is
flashing and can be changed.
If the complete number is flashing, you can move the decimal point.
If no cipher is flashing anymore, you can go to the programming of
the outputs by pressing key 2.
Primary voltage
Secondary voltage
Phase to phase
voltage transformer symbol
Secondary voltage in Volt
PRG
kV
L1
L2
L3
VT
L-L
PRG
V
L1
L2
L3
VT
L-L
Primary voltage in kV
Attention!
The program only allows current and voltage transformer
ratios, if the single phase power can be 33.3kW maximum
and the sum power 99.9kW maximum.
m
