28
1. Slide on main coulter body with stop inside. The square headed bolt in the stop sits in the drilled depression
(as shown below). Insert a roll pin into the bottom hole of the coulter rod to hold the coulter on the rod.
2. Mount coulter wheels using 1/2”-13 x 2” studs, 1/2” lock washer, 1/2”-13 hex nut, and dust cap keeper.
3. After mounting the coulters, install the knife mounts onto the coulter arm. Secure each knife mount with (2)
1/2”-13 x 1-3/4” hex bolts, (2) 1/2” lock washers, (2) 1/2” flat washers, and (2) 1/2”-13 hex nuts.
Depression
for square
head bolt
Roll pin
goes here
Rotation
lock collar
Knife
mount
Coulter
Coulter and Wheel Finishing
