25
7. Bottom parts for coulters will be added in later steps.
8. Continue to measure 70cm across the tool bar to place coulters.
9. Offset coulter mounts are used in areas or hinges that dont allow a direct mount. Coulter 7 uses an offset
coulter mount. Offset coulter mounts use (2) 5/8”-11 x 7-1/8” x 8-11/16” square U-bolts with (2) 5/8” serrated
flange hex nuts. Use (4) 5/8” x 3-1/2” hex bolts to mount the channel bracket castings to the offset coulter
mount and secure with 5/8” centerlock hex nuts.
3
4
{
70cm
7
6
8
{
70cm
Coulter Mounting - 70cm Row Spacing
