21
7. Bottom parts for coulters will be added in later steps.
8. Mount coulter 2 from the opposite direction as coulter 1. Coulter 2 uses the wider channel bracket plate to get
around the weldments (shown below). Use (2) 5/8”-11 x 7-1/8” x 8-11/16” square U-bolts to mount the wider
channel bracket plate, and (4) 5/8” x 3-1/2” bolt and 5/8” serrated flange hex nut to fasten the rod of the coulter.
9. Offset coulter mounts are used in areas or hinges that dont allow a direct mount. Mount coulter 5 to the front
of the wing with an offset mount (shown in red below). Coulter 5 is the only coulter on the wings that is
mounted on the front. Offset coulter mounts use (2) 5/8”-11 x 7-1/8” x 8-11/16” square U-bolts with (2) 5/8”
serrated flange hex nuts. Use (4) 5/8” x 3-1/2” hex bolts to mount the channel bracket castings to the offset
coulter mount and secure with 5/8” centerlock hex nuts.
10. Mount coulter 10 to the back of the wing with an offset mount (shown in red below).
{
45cm
{
45cm
Offset coulter
mounts
5
4
3
10
11
9
1
2
Coulter Mounting - 45cm Row Spacing
