Removable Memory
IMPORTANT NOTE!
To avoid possible damage to microSD, micro-SIM, micro-SAM cards or the XT3 itself,
ESD (electrostatic discharge) precautions are recommended when installing or
removing microSD and/or SIM cards. Before handling, discharge any personal static
electric buildup to a point of discharge other than the device.
microSD Card
About microSD Cards
The XT3 rugged touch computer has a microSD flash memory card slot in its battery compartment
that is compatible with SDXC (Secure Digital Extended Capacity) cards with capacities of up to 2TB
(exFAT32 card formatting). Older SD and SDHC cards can also be used. Removable microSD memory
is useful for general file storage, uploading and downloading of user data, and more. The use of
high-quality microSD cards supplied by a reputable manufacturer is recommended.
To access the microSD card slot:
Remove the battery compartment cover on the back of the unit by
sliding the spring-loaded cover lock to the left, holding it in that position,
and then gently pulling the cover up by the two tabs on the left and right
of the cover. Then remove the XT3 battery.
To install the microSD card:
Lift up the black protective rubberflap as shown in the photo to the right.
Locate the microSD card slot in the battery compartment (highlighted
orange). Place a compatible microSD card with its brand and capacity
markings facing you and its smaller edge going into the card slot. Fully
insert the microSD card. DO NOT attempt to insert the microSD card in
any other orientation. Put the battery back into its compartment and
put the battery compartment cover back on.
To remove the microSD card:
Before removing a microSD card, Go to
Settings
>
Storage and USB
>
SD card
. Tap the eject symbol and the card will be unmounted. Then
remove the battery compartment cover, remove the battery, and gently
remove the microSD card.
XT3 Setup
XT3
User Manual
Janam Technologies LLC Version 1, March 2020
XT3 Setup 3—1
XT3 Setup
3
