Getting Started
XT3
User Manual
Janam Technologies LLC Version 1, March 2020
Getting Started 2—5
Turning the Janam XT3 Rugged Touch Computer on
1. Press and hold the
Power Key
(marked red in its center)
on the top right-hand side of the XT3.
⎯
If the XT3 is being powered on for the first time,
follow the on-screen setup instructions.
⎯
When the XT3 is on, pressing the power button briefly
will suspend operation until it is pushed again.
2. When powered on, an
unsecured
XT3 will first display the
Android lock screen
. It is unlocked by swiping up on the
screen. The
lock screen
will be replaced with the
start
screen
. For information about securing the XT3 with a
password or pin code, refer to Chapter 3.
3. When powered on, a
secured
XT3 will also first display the
Android lock screen. Swipe up to get to the
pin code
keypad
. Enter your pin code. Once the correct pin code has
been entered and you’ve tapped on the check mark, the
welcome screen
with the
pin code keypad
will be replaced with the
start screen
. For
information about securing the XT3 with a password or pin code, refer to Chapter 3.
Unsecured: just swipe up
Secured: enter pin, then swipe up
Both ways get to the start screen
