XT200 Setup
XT200
User Manual
Janam Technologies LLC Version 2, April 2020
XT200 Setup 3—2
SIM Cards
About SIM Cards
SIM (Subscriber Identity Module) cards are needed to add cellular voice and/or data communication
service to devices equipped for cellular signal functionality. SIM cards carry an identification number
unique to the owner, storing personal data, and preventing operation if
removed. SIM cards can be transferred between devices supporting the same
communications standards. SIM cards come in
standard
,
micro
, or
nano
format. Most carriers offer SIM cards in all standards, or they have cutouts for
all three sizes (the electronics and contacts are the same for all sizes).
Janam XT200 rugged touch computers equipped with optional WWAN (Wireless Wide Area Network)
cellular signal functionality include two removable micro-SIM card slots. Neither cellular signal
connectivity for internet access nor optional 3rd party voice telephone applications can function
without an activated SIM card installed. The XT200 SIM card slots are designed for use with
micro
SIM cards
. If a SIM card provided by your cellular carrier uses the nano format, you need a (readily
available) SIM card adapter to use it in the XT200. Contact Janam or your local carrier for more
information about SIM cards and wireless service.
To access the SIM card slots:
Remove the battery compartment cover on the back of the unit by
firmly depressing the battery locker button marked PUSH, holding it in
that position, and then slowly and carefully prying open the battery
compartment cover. Then remove the XT200 battery.
To install a SIM card:
The location of the SIM card slots in the battery compartment is shown
in the illustration to the right. Orientate a compatible micro SIM card
(or nano SIM card in a micro SIM adapter) with its straight edge facing
into the slot and its golden contacts surface facing down. Carefully
insert the SIM card fully into slot.
NEVER attempt to insert a SIM card in any other orientation or force a
SIM card into its slot.
Once the SIM card is installed, replace the battery and carefully put
the battery compartment cover back on.
standard micro nano
USB Port
The Janam XT200 provides USB connectivity through its
USB Type-C
port on the right side of the
device. An optional USB Sync cable is required. Wired USB connectivity is also possible through the
optional Single Slot Cradle.
1 2
