Getting Started
XT200
User Manual
Janam Technologies LLC Version 2, April 2020
Getting Started 2-6
Turning the XT200 Rugged Mobile Computer On
1. Press the
Power Key
on the right side of the XT200.
⎯
If the XT200 is being powered on for the first
time, follow the on-screen setup instructions.
⎯
When the XT200 is on, pressing the power
button briefly will suspend operation until
it is pushed again.
2. When powered on, an
unsecured
XT200 will first
display the
Android lock screen
. It can be
unlocked by swiping up on the screen. The
lock
screen
will be replaced with the
home screen
. For
information about securing the XT200 with a
password or pin code, refer to Chapter 3.
3. When powered on, a
secured
XT200 will also first
display the Android lock screen. Swipe up to get to
the
pin code keypad
. Enter your pin code. Once
the correct pin code has been entered and you’ve
tapped on the check mark, the
welcome screen
with the
pin code keypad
will be replaced
with the
home screen
. For information about securing the XT200 with a password or pin
code, refer to Chapter 3.
Unsecured: swipe up
Secured: enter pin, then swipe up
Both ways get to the start screen
