Getting Started
XT200
User Manual
Janam Technologies LLC Version 2, April 2020
Getting Started 2-7
Turning the XT200 Rugged Touch Computer Off
1. To simply put the XT200 display to sleep, just briefly press the
Power Key
. The display will turn
off. To turn the XT200 back on from this state of sleep, depress the
Power Key
again. The
welcome screen will come up, and by swiping up you will return to the last used app.
2. To put the XT200 display to sleep and also shut down Android, press and hold the
Power Key
(marked red in its center) until the “Power off/Restart/Airplane mode” overlay appears. Press on
"Power Off" until you feel the vibration and see the “Technology at Work” logo. To turn it back on,
press the
Power Key
to restart Android. Here you can turn sound on or off via the bell icon, or
return to normal operation by tapping the multitask icon between the bells.
3. To completely power down the XT200 and reboot it from a cold start, press and hold the
Power
Key
and keep holding it for about ten seconds. The display will go black, and in a few seconds
the XT200 will reboot automatically.
Touch Screen Navigation
The XT200 uses capacitive multi-touch technology. Almost all of the XT200’s functions can be
accessed and used by tapping, swiping or dragging with one finger. Some operations, such as
zooming in and out, are performed with pinching two fingers together or dragging them farther
apart.
Note that capacitive touch works by sensing your fingers. Never use an actual pen, pencil, or any
sharp object to operate the touch screen. They may damage the touch screen.
Touch
Touch a tile or object
to select or open it.
Touch and hold
Touch and hold a tile
or object to bring up
available options.
Touch and drag
Touch and then drag/
swipe an object to
move it in any direc-
tion.
Pinch and spread
Put two fingers on
the display, then
drag them together
or apart to zoom in
or out.
