Wireless Network Connection
XG200
User Manual
Janam Technologies LLC Version 2, April 2019
Wireless Network Connection 4—2
Connecting the XG200 to a Wireless Local Area Network (WLAN)
To initially connect the XG200 to a wireless local area network, go to
Settings
>
Wireless &
networks
>
WLAN
. Turn
WLAN networking
on. The XG200 will begin searching for available Wi-
Fi networks. After a few seconds it will list what it has found, including the approximate signal strength
and whether or not a network is secured by a password or not. Tap on your preferred network. Enter
the password. The connection will be established. Upon successful completion, the network link will
show up as
Connected
.
If you tap on the network you are connected to,
a window pops up that shows information about
the connection, including signal strength, link
speed, frequency, and the type of security. Here
you can also opt to
forget
this network, so that
next time you come within range of it, the
XG200 will not automatically connect.
In
Settings
>
Wireless & networks
>
WLAN
,
you may also tap the options button on the
upper righthand corner. This launches a pop-up
from where you can
Refresh
the list of available
networks or go to
Advanced
options.
