Getting Started
XG200
User Manual
Janam Technologies LLC Version 2, April 2019
Getting Started 2-6
Turning the XG200 Rugged Mobile Computer On
1. Press the
Power Key
(marked red in its center)
on the left-hand side of the XG200.
⎯
If the XG200 is being powered on for the first time,
follow the on-screen setup instructions.
⎯
When the XG200 is on, pressing the power button briefly
will suspend operation until it is pushed again.
2. When powered on, an
unsecured
XG200 will first display the
Android lock screen
. It can be unlocked by swiping up on
the screen. The
lock screen
will be replaced with the
home
screen
. For information about securing the XG200 with a
password or pin code, refer to Chapter 3.
3. When powered on, a
secured
XG200 will also first display
the Android lock screen. Swipe up to get to the
pin code
keypad
. Enter your pin code. Once the correct pin code has
been entered and you’ve tapped on the check mark, the
welcome screen
with the
pin code keypad
will be replaced with the
home screen
. For
information about securing the XG200 with a password or pin code, refer to Chapter 3.
Unsecured: swipe up
Secured: enter pin, then swipe up
Both ways get to the start screen
