XG105
User Manual
Janam Technologies LLC
Version 1, August, 2012
7―2
Setting Up and Deleting Partnerships
An XG105 partnership enables you to automatically synchronize selected XG105 files at startup when
all synchronization conditions are met (see Note below). Alternatively, you can run synchronization
manually (on command); copying only the files you want to sync.
To set up a partnership to automatically sync files:
1. Connect your XG105 to your PC and power the XG105 on.
Synchronization requires any one
−
A USB cable connected to a Janam USB Cradle with the XG105 docked in the cradle.
of the following:
−
An Ethernet cable connected to a Janam RS232 Serial Cradle with the XG105 docked in the
cradle.
−
A direct connection between the XG105 and the host PC, using a Janam USB or RS232 Serial
Syncing/Charging Cable.
2. On your PC, select Start menu > Programs >
Windows Mobile Device Center.
3. At the Microsoft Mobile Device Center Home screen
(on your PC), click Set up your device to proceed.
Note:
It may be necessary to occasionally
reactivate the unit from its sleep mode
during the partnership set up and/or
synchronization process.
4. The Set Up Windows Mobile Partnership window
appears. Select the data types that you want to
synchronize and tap Next.
5. The Set Up Windows Mobile Partnership (Device
name) window appears. Use the default name or
enter a new name.
6. Tap Set Up to proceed. Set Up will start, followed
by synchronization between the PC and the XG105.
Note:
The Files checkbox must be selected to
synchronize files which were created on
the XG105.
