XG105
User Manual
Janam Technologies LLC
Version 1, August, 2012
2―6
Charging a Spare Battery in Single-Slot Cradle Spare Battery Well or
Four-Slot Battery Charger
1. Insert and slide the battery into the charging slot as shown.
2. Press down and forward with index finger to fully seat the battery.
3. The LED will illuminate to confirm connection (orange indicates charging, green indicates fully
charged and red indicates a fault condition).
4. The battery is fully charged in approximately 5 hours.
Turn the XG105 On
With fully charged batteries installed, press the red power button located on the keypad to the
right of the up/down/left/right arrow keys.
The first time the device is turned on, calibrate the screen using the stylus. To calibrate, simply follow
the on-screen instructions and remember to save your settings.
IMPORTANT NOTE!
Always use the supplied stylus for tapping or making strokes on screen.
DO NOT use a pen, pencil or any other object on the touch screen.
Note:
If your XG105 came pre-loaded with a custom software application, a welcome
utility may not appear. If this happens, follow the on-screen instructions.
IMPORTANT NOTE!
DO NOT turn the device on/press the power button if the main battery is not installed
in the battery chamber as this may result in permanent loss of data.