manualshive.com logo in svg

Jameco Electronics Rabbit 2000, User Manual

The Jameco Electronics Rabbit 2000 User Manual is a comprehensive guide to help you navigate and maximize the potential of your Rabbit 2000. This invaluable resource is available for free download from manualshive.com, ensuring you have all the information needed to operate this exceptional product seamlessly.

Share
Download
background image

Rabbit 3000 Microprocessor

3.5  Interrupt Structure .............................................................................................................................. 44

3.5.1  Interrupt Priority ........................................................................................................................ 44
3.5.2  Multiple External Interrupting Devices ..................................................................................... 46
3.5.3  Privileged Instructions, Critical Sections and Semaphores  ....................................................... 46
3.5.4  Critical Sections ......................................................................................................................... 47
3.5.5  Semaphores Using Bit B,(HL)  .................................................................................................. 47
3.5.6  Computed Long Calls and Jumps .............................................................................................. 48

Chapter 4.  Rabbit Capabilities

 49

4.1  Precisely Timed Output Pulses .......................................................................................................... 49

4.1.1  Pulse Width Modulation to Reduce Relay Power  ..................................................................... 50

4.2  Open-Drain Outputs Used for Key Scan............................................................................................ 51
4.3  Cold Boot ........................................................................................................................................... 52
4.4  The Slave Port .................................................................................................................................... 53

4.4.1  Slave Rabbit As A Protocol UART ........................................................................................... 54

Chapter 5.  Pin Assignments and Functions

 55

5.1  LQFP Package.................................................................................................................................... 56

5.1.1  Pinout ......................................................................................................................................... 56
5.1.2  Mechanical Dimensions and Land Pattern  ................................................................................ 57

5.2  Ball Grid Array  Package ................................................................................................................... 59

5.2.1  Pinout ......................................................................................................................................... 59
5.2.2  Mechanical Dimensions and Land Pattern  ................................................................................ 60

5.3  Rabbit Pin Descriptions...................................................................................................................... 62
5.4  Bus Timing ......................................................................................................................................... 64
5.5  Description of Pins with Alternate Functions .................................................................................... 65
5.6  DC Characteristics.............................................................................................................................. 68
5.7  I/O Buffer Sourcing and Sinking Limit.............................................................................................. 69

Chapter 6.  Rabbit Internal I/O Registers

 71

6.1  Default Values for all the Peripheral Control Registers..................................................................... 73

Chapter 7.  Miscellaneous Functions

 79

7.1  Processor Identification...................................................................................................................... 79
7.2  Rabbit Oscillators and Clocks ............................................................................................................ 80
7.3  Clock Doubler .................................................................................................................................... 83
7.4  Clock Spectrum Spreader................................................................................................................... 86
7.5  Chip Select Options for Low Power .................................................................................................. 87
7.6  Output Pins CLK, STATUS, /WDTOUT, /BUFEN .......................................................................... 90
7.7  Time/Date Clock (Real-Time Clock) ................................................................................................. 91
7.8  Watchdog Timer................................................................................................................................. 93
7.9  System Reset ...................................................................................................................................... 95
7.10  Rabbit Interrupt Structure................................................................................................................. 97

7.10.1  External Interrupts  ................................................................................................................... 99
7.10.2  Interrupt Vectors: INT0 - EIR,0x00/INT1 - EIR,0x08 .......................................................... 100

7.11  Bootstrap Operation ....................................................................................................................... 101
7.12  Pulse Width Modulator .................................................................................................................. 103
7.13  Input Capture.................................................................................................................................. 105
7.14  Quadrature Decoder ....................................................................................................................... 110

Chapter 8.  Memory Interface and Mapping

 115

8.1  Interface for Static Memory Chips................................................................................................... 115
8.2  Memory Mapping Overview ............................................................................................................ 117
8.3  Memory-Mapping Unit .................................................................................................................... 117
8.4  Memory Interface Unit..................................................................................................................... 119

Summary of Contents for Rabbit 2000






























































































































































































































































































































































Reviews:

No comments

Related manuals for Rabbit 2000

B2 ABB2050 Instruction Manual preview
ABB2050
Brand: B2 Pages: 52
Campbell NL115 Instruction Manual preview
NL115
Brand: Campbell Pages: 42
Yamaha mLAN Driver Manual Book preview
mLAN Driver
Brand: Yamaha Pages: 24
Yamaha DSP1D Supplementary Manual preview
DSP1D
Brand: Yamaha Pages: 5
Black Box LT2060A Manual preview
LT2060A
Brand: Black Box Pages: 37
Barco Encore VPx Installation Manual preview
Encore VPx
Brand: Barco Pages: 30
IBM 8677 - BladeCenter Rack-mountable - Power Supply Planning And Installation Manual preview
8677 - BladeCenter Rack-mountable - Power Supply
Brand: IBM Pages: 126
Microchip Technology DM240316 Quick Start Manual preview
DM240316
Brand: Microchip Technology Pages: 9
ICP Chapter C Quick Setup Manual preview
Chapter C
Brand: ICP Pages: 68
G&D DVI-Vision-IP-Fiber Installation And Operation Manual preview
DVI-Vision-IP-Fiber
Brand: G&D Pages: 240
Bailey INFI 90 NTAI06 Instruction preview
INFI 90 NTAI06
Brand: Bailey Pages: 33
Renesas Emulation Memory Board R0E330850MSRC0 User Manual preview
Emulation Memory Board R0E330850MSRC0
Brand: Renesas Pages: 4
ADTRAN 1203086L1 Manual preview
1203086L1
Brand: ADTRAN Pages: 162
Arista CCA-ETM-Q8W Quick Start Manual preview
CCA-ETM-Q8W
Brand: Arista Pages: 22
HP StoreOnce 2900 Read Me First preview
StoreOnce 2900
Brand: HP Pages: 4
HP UNDP-1H Installation Manual preview
UNDP-1H
Brand: HP Pages: 48
HP ProLiant DL145 Maintenance And Service Manual preview
ProLiant DL145
Brand: HP Pages: 109
Nahita ZFP009 User Manual preview
ZFP009
Brand: Nahita Pages: 9

Brands by name

Popular brands

Load more brands