JAI TM-6740GE, User Manual

Page: 58 / 72

TM-6740GE Series
58 Configuring the Camera
Figure 27. CountersAndTimersControls
5.8.5 Counters
The General Purpose Counter lets you maintain a count between 0 and 2
32
-1 (long integer). You can use
different inputs to increment, decrement, or clear the counter value.
The General Purpose Counter outputs two separate signals that indicate when the count is equal to and greater
than the compare value that you set: Counter1Gt and Counter1Eq. These signals are available on the Input lines
in the Signal Routing Block.
CounterSelector: selects which counter to configure. There is only 1 counter called Counter1.