TM-6740GE Series
36
Functions and Operations
Note: The Mono10 and BayerGRI0 settings at full frame rate will exceed GigE bandwidth. It is recommended to
use Mono8, Mono10Packed, or BayerGR8 for max frame rate.
For TM-6740GE series cameras, the jumbo frame can be set at a maximum 16260 Bytes (Factory setting is 1428
Bytes). To set Jumbo Frames, refer to section 4.3.4.
To ensure the integrity of packets transmitted from the camera it is recommended that these simple guidelines
be followed:
1.
Whenever possible use a peer-to-peer network.
2.
When connecting several cameras going though a network switch, make sure it is capable of
handling jumbo packets and that it has sufficient memory capacity.
3.
Configure inter-packet delay to avoid congestion in network switches.
4.
Disable screen saver and power save functions on computers.
5.
Use high performance computers with multi-CPU, hyper-thread and 64-bit CPU, etc.
6.
Only use Gigabit Ethernet equipment and components together with the camera.
7.
Use at least Cat5e or preferably Cat6 Ethernet cables.
8.
Whenever possible, limit the camera output to Mono8 or Mono10Packed for Monochrome
cameras and BayerGR8 for color.
4.3.3
Disable Firewalls
To ensure proper operation of the JAI SDK & Control Tool, all firewalls
must be disabled. This also includes the Windows firewall.
Click [Start], [Control Panel] for accessing the Windows
firewall configuration.
4.3.4
Enabling Jumbo Frames
(1) Click [Start] and click [Control Panel].
(2) Click [Performance and Maintenance].
(3) Click [System].
(4) Click [Hardware] tab.
(5) Click [Device Manager]
Summary of Contents for TM-6740GE
