JAI TM-6740GE, User Manual

Page: 53 / 72

Configuring the Camera 53
TM-6740GE Series
Figure 23. SignalRoutingBlock
Here are the possible input signals into the PLC:
Signal Source Signal Name / Input Pin Description
12 Pin External_Trigger_In_Pin6 External trigger signal.
12 Pin External_VD_In_Pin7 External vertical drive signal.
12 Pin External_HD_In_Pin9 External horizontal drive signal.
12 Pin External_INT_In External Integration Control / Read Out Inhibit signal.
Camera Internal_FDV_Out Frame Data Valid output signal generated by camera head.
Camera Internal_LDV_Out Line Data Valid output signal generated by camera head.
Camera Internal_CAM_STROBE_Out Strobe output signal generated by the camera head.
PLC PLC_ctrl0 True / False (High/Low) switch used for software trigger. (1)
PLC PLC_ctrl2 True / False (High/Low) switch used for software trigger. (1)
PLC PLC_ctrl3 True / False (High/Low) switch used for software trigger. (1)
PLC PLC_Q2 PLC output that can be routed back to the PLC.
PLC PLC_Q3 PLC output that can be routed back to the PLC.
PLC PLC_Q6 PLC output. This signal is also connected to the EXT_VD that
goes to the camera head. Please see the
PLCSpecialConfigurations section below.
PLC PLC_Q7 PLC output. This signal is also connected to the EXT_HD that
goes to the camera head. Please see the
PLCSpecialConfigurations section below.
Counter Counter1Gt Counter1’s output signaling when the current count value is
greater than some user defined value. Please see Counter
section below.
Counter Counter1Eq Counter1’s output signaling when the current count value
equal to some user defined value. Please see Counter section
below.