JAI RM-670, User Manual

Page: 57 / 82

Appendix 57
RM-67X Series
8.3.25 Color Intensity - Red
Function Command String Camera Response
Get Red Intensity
:CIR?<cr> :oCGR[DDDD]<cr>
Enquire current red color intensity. [DDDD] is the current
intensity value with a range of 1-4184394.
8.3.26 CID Customer ID String
Function Command String Camera Response
Set User-defined ID String :CID=[XXX..]<cr> :o<cr>
Set the user-defined ID string in the camera’s EEPOM memory.
[XXX…] specified up to 16 ASCII characters that are the user-
defined ID string.
Note: This feature applies to the TM-770, TM-773, and TM-
775.
Get User-defined ID String
:CID?<cr> :o [XXX….]<cr>
Enquire the current user-defined ID string value in the
camera’s EEPROM memory. [XXX…] Note: This feature applies
to the TM-770, TM-773, and TM-775.
8.3.27 Color Mode
Function Command String Camera Response
Set Color Mode
:CMD=[D]<cr> :o<cr>
Set camera mode to mono or color. [D] is the mode value.
0 = Mono mode.
1 = Color mode.
Get Color Mode
:CMD?<cr> :oCMD[D]<cr>
Enquire current color mode. [D] is the current mode value.
0 = Mono mode.
1 = Color mode.
8.3.28 Defect Correction
Function Command String Camera Response
Set Defect Correction
:DFC=[D]<cr> :o<cr>
Turn Defect Correction on/off. [D] is the state value.
0 = Defect correction off.
1 = Defect correction on .
Get Defect Correction
:DFC?<cr> :oDFC[D]<cr>
Enquire current Defect Correction state. [D] is the current
state value.
0 = Defect correction off.
1 = Defect correction on.