JAI RM-670, User Manual

Page: 43 / 82

Specifications 43
RM-67X Series
7 Specifications
7.1 Product Specifications
Table 1
RM-67X Product Specifications Table
Model RM-670 RM-675NIR RM-673NIR
Sensor
2/3”interlace CCD
IXC423AL
1/2” NIR interlace CCD
IXC429AL
1/3” NIR interlace CCD
IXC259AL
Active pixels
752 (H) x 582(V)
Chip size
10.25 mm x 8.5 mm 7.4 mm x 5.95 mm 6.0mm x 4.96 mm
Cell size
11.6 μm x 11.2 μm 8.6 μm x 8.3 μm 6.5 μm x 6.25 μm
Scanning
625 lines / 50 Hz
Synchronization Internal/External auto switch
HD/VD 4.0 Vp-p impedance 10 K Ω
VD = interlace/non-interlace
HD = 15.62 KHz ± 5%
TV resolution 560 (H) x 420 (V)
S/N ratio >53 dB min. (AGC off)
Sensitivity 0.16 lux (f=1.4) 0.10 lux (f=1.4) 0.20 lux (f=1.4)
High Sensitivity Option
Low-light sensitivity increased by up to a factor of 100 (resolution is reduced)
Video output
1.0 Vp-p composite video, 75 Ω
Gamma
0.45 / 1.0 (RS-232 controlled)
Lens mount
C-mount (adjustable)
Power requirement 12V DC, 150 mA typical at 25° C
Operating temperature
Standard
OP22-5-1
-10° C to +50° C
-40° C to +65° C (configurable option-reduced performance may occur)
Storage temperature
-50° C to +70° C
Vibration
7Grms (20 Hz to 2000 Hz) Random
Shock
70 G, 11 ms, half-sine
Dimensions
(H x W x L)
32 x 42 x 48.48 mm with mechanical enclosure
29.3 x 39.4 x 35.66 without mechanical enclosure
Weight
113 g (with mechanical enclosure)
69 g (without mechanical enclosure)
Power supply
PD-12UU Flying leads
Cables
15P-02-9P-Full or 15P-02-9P
Optional functions
OP1-5 - Auto level control (EE and AGC),
OP2-5 - Blemish compensation,
OP22-5-1 – Extended temperature, OP22-5-5 – Conformal coat