JAI RM-670, User Manual

Page: 54 / 82

RM-67X Series
54 Appendix
8.3.13 Blemish Count
Function Command String Camera Response
Get Blemish Count
:BCT?<cr> :oBCT[DDD]<cr>
Enquire current blemish count. The camera keeps a list of
blemish pixels that are bright regardless of the input signal.
This function returns the number of blemishes that have been
identified for this camera. [DDD] is the returned count value.
8.3.14 Blemish Threshold
Function Command String Camera Response
Set Blemish Threshold :BTH=[DDD]<cr> :o<cr>
Set the threshold value that the camera will use as a
comparison value to identify blemish pixels that are bright
regardless of the input signal. Any pixel with a count value
higher than the blemish threshold will be marked as a blemish
pixel. [DDD] is the threshold value and has a range of 0-1023.
Get Blemish Threshold
:BTH?<cr> :oBTH[DDD]<cr>
Enquire current blemish threshold value. The camera uses this
threshold as a comparison value to identify blemish pixels that
are bright regardless of the input signal. Any pixel with a
count value higher than the blemish threshold will be marked
as a blemish pixel. [DDD] is the threshold value and has a
range of 0-1023.
8.3.15 Bright Speed
Function Command String Camera Response
Set Bright Speed
:BTS=[DD]<cr> :o<cr>
Set the BST value (bright speed for ALC). [DD] is the level
value with a range of 1-100. This command applies only to
camera models TM-770.
Get Bright Speed
:BTS?<cr> :oBTS[DD]<cr>
Enquire current BTS value (bright speed for ALC). [DD] is the
current value with a range of 1-100. This command applies
only to camera models TM-770.
8.3.16 Camera Model Number
Function Command String Camera Response
Get Camera Model No :CAM?<cr> :o[DDD]<cr>
Enquire current Camera Model. [DDD] is a string representing
the model number. Maximum length is 10 characters.