User Manual (Ver. 1.0) - Preparation
GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE
- 30 -
The longest cable length varies depending on the type of LAN cable and the Ethernet standard. Below,
the table shows the relationship diagram between LAN cable type and Ethernet standard. Correctly
select the LAN cable type according to the Ethernet standard to be used.
Caution:
When providing power via PoE without a heatsink set, the maximum cable length will be
less than 10m. For more information, see
Notes on Supplying Power via PoE
Cat5e
Cat6/Cat6e
Cat6A
Cat7
1000BASE-T
100m
100m
100m
100m
2.5GBASE-T
100m
100m
100m
100m
5GBASE-T
-
100m
100m
100m
⑤
Network Card
Install this in the computer that will be used to configure and operate the camera. As the camera
supports PoE, you can also use PoE-compatible network cards. Refer to the instruction manual of the
network card and configure settings on the computer as necessary.
⑥
DC IN / Trigger IN Connection Cable
Performs external I/O such as power supply and trigger input.
⑦
AC Adapter (Power Supply) (If Necessary)
Connect the AC adapter and the round connector of the connection cable to the DC IN / Trigger IN
connector on the camera.
Step 3: Verify Camera Operation
When power is supplied to the camera while the necessary equipment is connected, the
POWER/TRIG LED at the rear of the camera lights amber, and initialization of the camera starts.
When initialization is complete, the POWER/TRIG LED lights green.
Verify whether power is being supplied to the camera by checking the rear LED. When properly turned
on, the power LED is lit green.
For details on how to read the LEDs, see the
section.
