User Manual (Ver. 1.0) - Main Functions
GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE
- 106 -
l
SequencerFrameCount
: This configures the number of frame acquisitions for the selected
SequencerIndex.
l
SequencerReset
: During TriggerSequencer mode operation, this switches the index number to
be executed to that specified in SequencerSetStart.
l
SequencerRepetition
: This parameter applies to TriggerSequencer patterns which include an
index whose SequencerROINextIndex is set to 0 (OFF).
When the index whose SequencerROINextIndex is set to 0 (OFF) is finished executing, the
value of Sequencer Repetition (range = 1 ~ 255) is decremented internally. If the result of the
decrement is not zero, the TriggerSequencer pattern starts over from the index specified in
SequencerSetStart. If the result of the decrement is zero, the status changes to Acquisition Stop
and external triggers are not accepted.
Sample TriggerSequencer Mode Operation
User-Defined Indexes (Up to 32)
1. Specify "1" in SequencerSetStart and start TriggerSequencer mode with index 1.
2. Based on the SequencerFrameCount setting (= 2), capture a 2-frame image with the first and
second triggers.
3. For the next index, configure index 3 specified in SequencerSetNext, and capture an image with
the number of frames (the number of triggers) specified in SequencerFrameCount (=1).
4. Proceed to sequence from index 4 to index 2 to index 1.
Note:
In addition to repeating multiple conditions as in the above example, you can specify "0"
(which indicates the end of TriggerSequencer mode) in SequencerSetNext of index 2 and specify
the number of repetitions in SequencerRepetition.
