![background image](http://html.mh-extra.com/html/jai/go-5100mp-usb/go-5100mp-usb_user-manual_631516058.webp)
— 58 —
GO-5100MP-USB
Setting range
Default value
Description
Configure controling polarization settings.
Raw Image,
Four Polarize Element,
Four Functions,
Color on Picture,
Color on Gray
Raw Image
Set the video output mode.
Polarize Angle,
Polarize Ratio,
Diffused Light,
Polarized Light,
Average Light
ー
Polarize Angle,
Polarize Ratio,
Diffused Light,
Polarized Light,
Average Light
ー
Polarize Angle,
Polarize Ratio,
Diffused Light,
Polarized Light,
Average Light
ー
Polarize Angle,
Polarize Ratio,
Diffused Light,
Polarized Light,
Average Light
ー
50 〜 200 % step 10
100
The ratio for removing the polarized light
component can be changed by adjusting
Reflection Adjust.
If ReflectionAdjust is set higher, DiffusedLight with
more of the polarized light component removed can
be obtained.
Setting range
Default value
Description
Configure settings for other JAI functions.
Off, On
Off
Enable/disable VideoProcessBypass mode.
Off
Off
10μs,
100μs,
500μs,
1ms,
5ms,
10ms
Select the surge protection filter
Normal Mode,
Trigger Sequencer Mode,
Command Sequencer Mode
Normal Mode
Display the [VideoSendMode].
8
8
Display the number of sensor output LVDS
channels.
10Bits, 12Bits
10Bits
Display the resolution per pixel of sensor
output.
Item
Item
This mode allows you to set the image to
output by assigning any of the following
five information items to each area of the
screen divided into four.
The five information items are as follows.
PolarizeAngle,
PolarizeRatio,
DiffusedLight,
PolarizedLight,
AverageLight
Panel 1 to 4 show the 4 division positions
as shown below.
Panel1 Selector : top left
Panel2 Selector : top right
Panel3 Selector : bottom left
Panel4 Selector : bottom right
Trigger Option
q)
) AICustomControlMisc
p)
) AICustomControlPolarized
Polarize Image Selector
Panel4 Selector
Reflection Adjust [%]
Sensor LVDS Ch Num
Sensor Digitization Bits
Video Send Mode
OptIn Filter Selector
VideoProcessBypassMode
Panel3 Selector
Panel1 Selector
Panel2 Selector