![background image](http://html.mh-extra.com/html/jai/go-5100mp-usb/go-5100mp-usb_user-manual_631516050.webp)
— 50 —
GO-5100MP-USB
Setting range
Default value
Description
Configure settings for digital input/output.
Line2-Opt Out 1,
Line3-Opt Out 2,
Line5-Opt In 1,
Time Stamp Reset,
NAND Gate 0 In 1,
NAND Gate 0 In 2,
NAND Gate 1 In 1,
NAND Gate 1 In 2
Line2-Opt Out 1
Select the input/output to configure.
Line Mode
Input, Output
ー
Display the input/output status (whether it
is input or output).
Line Inverter
True, False
False
Enable/disable polarity inversion for the
selected input signal or output signal.
Line Status
True, False
ー
Display the status of the input signal or
output signal (True: High, False: Low).
Line Source
Low,
High,
Acquisitiion Trigger Wait,
Acquisition Active,
Frame Trigger Wait,
Frame Active,
Exposure Active,
FVAL,
LVAL,
PulseGenerator0,
User Output 0,
User Output 1,
Line5 - Opt In 1,
NAND0Out,
NAND1Out,
Low
Select the line source signal for the item
selected in [LineSelector].
Line Format
ー
Opto Coupled
Display the signal format.
ー
0x00
Display the input/output signal status.
The state is shown with 16 bits. Bit
assignments are as follows.
[0]
0] (unus
[1]
1] Line2 - OptO
[2]
2] Line3 - OptO
[3]] (unus
[4]
4] Line5 - Opt I
[5], [6], [7], [8], [9], [10] (unused)
[11]
11] Time Stamp R
[12]
12] NAND Gate 0
[13]
13] NAND Gate 0
[14]
14] NAND Gate 1
[15]
15] NAND Gate 1
User Output 0
User Output 1
User Output 0
Set the UserOutput signal.
User Output Value
True, False
False
Set the value for the UserOutput selected
in [UserOutputSelector].
Item
User Output Selector
Line Status All
Line Selector
e)
) Digital I/O contr