![background image](http://html.mh-extra.com/html/jai/go-5100mp-usb/go-5100mp-usb_user-manual_631516060.webp)
— 60 —
Specifications
GO-5100MP-USB
GO-5100MP-USB
Progressive scan, 1 tap
internal
USB 3 Vision compatible
monochrome CMOS image sensor with a four-directional polarization grid
2/3-inch 8.5mm(H) x 7.09mm(V) : 11.1mm(diagonal)
3.45 μm (H) x 3.45μm(V)
2464(H) x 2056(V)
8bit
Mono8
74.0 fps
10/12bit Packed
Mono10Packed, Mono12Packed,
59.2 fps
10/12bit UnPacked Mono10, Mono12
37.0 fps
T.B.D.
2464(H) x 2056(V)
Width
16 〜2464 pixels, 16 pixels/step
Offset X
0 〜2448 pixels, 16 pixels/step
Height
1 〜2056 lines, 2 lines/step
Offset Y
0 〜2054 lines, 2 lines/step
Mono8,Mono10, Mono10Packed,
Mono12, Mono12Packed
*When the video output mode is ColorOnPicture mode or ColorOnGray mode.
BayerRG8, BayerRG10, BayerRG10Packed
Continuous / Single Frame / Multi Frame(1 〜 255)
Acquisition Start / Acquisition Stop
Frame Start
AcquisitionTransfer Start(delayed readout)
5 steps (10 µs(Typ), 100 µs, 500 µs, 1ms, 5ms, 10ms)
Off / Read out
Line 5 (Opt In)、Software、PG0、NAND Out 0/1、Action 1/2
14.7 μs(min) 〜 8 s(max) variable unit:1 µs
❖ Performance verified for up to 1 second.
14.7 μs(min) 〜 ∞ s(max) variable unit:1 µs
❖ Performance verified for up to 1 second.
Normal Mode, Trigger Sequencer Mode,
Command Sequencer Mode, Multi Mode
Line Selector(6P):GPIO IN / GPIO OUT
33LSB@10bit
0 〜 100 @10bit
-33LSB 〜+64LSB against reference level(during 10bit output)
1 STEP =0.25LSB
Gain
adjustment
0dB 〜 24dB
1 step = x 0.01 (0.005dB〜0.08dB:varies by setting value)
Detect white blemishes using threshold values
(black blemish correction performed only at factory)
Interpolation using nearby pixels
(continuous blemishes not corrected)
256 pixels
10G(20 Hz 〜 200 Hz X-Y-Z direction)
80G
Input range
DC + 12 V 〜+ 24 V ± 10%(Via input terminal)
Power consumption
4.2 W (typ.) (at 12 V input, full pixel)
Input range
DC 5V
Power consumption
4.35 W (typ.) (at 5 V input, full pixel)
C mount
Lens mount protrusion length of 9 mm or less is supported
17.526, tolerance: 0 mm 〜 0.05 m
none
5℃〜+ 45℃ / 20%〜 80%(non-condensing)
25℃〜+ 60℃ / 20%〜 80%(non-condensing)
CE(EN61000-6-2 and EN61000-6-3)、FCC part 15 class B、
RoHS、WEEE
29 × 29 × 41.5 mm(W×H×D)(excluding mount protrutions)
46 g
Blemish
correction
Detection
Correction
Correctable pixels
Default level
Video level adjustment range
Adjustment range
Black Level
adjustment
Manual adjustment range
Trigger
Selector
Digital I/O
Video send mode
Timed
Trigger Witdh
Exposure
Mode
Transfer
Image size (effective image)
Scanning system
Synchronization
Interface
Image sensor
Effective image pixel (Image sensor)
Pixel size
EMVA1288 parameters
Absolute sensitivity
Maximum SN ratio
Item
Vibration resistance
Acquisition
Frame Rate
(max)
Acquisition Mode
Full
ROI
OptIn filter (for trigger noise)
Trigger overlap
Trigger input signals
Digital
image
output
format
Pixel Format
Acquisition
Exposure
Impact resistance
Weight
Verified performance temperature / humidity
Storage temperature / humidity
Regulations
Lens mount
Flange back
Optical filter
Dimensions (housing)
Power
supply
6-pin connector
USB BUS Power