![background image](http://html1.mh-extra.com/html/jai/go-5000m-pge/go-5000m-pge_user-manual_3244134084.webp)
GO-5000M-PGE | GO-5000M-PGE-UV | User Manual (Ver. 2.0)
Miscellaneous
- 84 -
Specifications
Description
Blemish Comp.
Detection
Detect white blemish above the threshold value (Black blemish is
detected only by factory)
Compensation
Complement by adjacent pixels (Continuous blemishes are not
compensated)
Numbers
Up to 512 pixels
ALC
AGC and auto exposure can be combined and automatically controlled
Gamma
γ=0.45, 0.6, 1.0 (3 steps are available)
Dark compression
Choice of Linear or Dark compression ON
LUT
OFF: γ=1.0, ON=32 points can be set
HDR
4 settings, Level 1, 2, 3 and 4
Power supply
6-Pin
Connector
Input range
DC+12V to +24V ± 10% (At the input terminal)
Current
190mA ± 20mA (At 12V input, Full pixels)
(Typical)
Power Consumption 2.5W (At 12V input, Full pixels) (Typical)
PoE
Input range
DC 36 ~ 57V
Current
58mA ±6mA (At 55V input, Full pixels) (Typical)
Power Consumption 3.0W (At 12V input, Full pixels) (Typical)
Lens mount
C mount, Rear protrusion of the lens is less than 10 mm.
Flange back
17.526 mm, Tolerance: 0 to -0.05 mm
Optical filter
Protection glass: Not provided
Operating temperature/Humidity Performance
guaranteed
-5°C to +45°C / 20 to 80% (No-condensing)
Storage Temp. / Humidity
-25°C to +60°C / 20 to 80% (No-condensing)
Regulation
CE (EN61000-6-2 and EN61000-6-3), FCC part 15 class B, RoHS, WEEE, KC
Housing Dimensions
29 x 29 x 52 mm (W x H x D) (excluding protrusion)
Weight
46g
Notes:
l
Note1): Usable performance will be up to 1 second.
l
Note2): A minimum of +12dB of gain can be applied without causing any breaks in the
histogram.
l
Approximately 5 minutes pre-heating is required to achieve these specifications.
l
The above specifications are subject to change without notice.