![background image](http://html1.mh-extra.com/html/jai/go-5000m-pge/go-5000m-pge_user-manual_3244134020.webp)
GO-5000M-PGE | GO-5000M-PGE-UV | User Manual (Ver. 2.0)
Preparation
- 20 -
③
LAN Cable
Connect a LAN cable to the RJ-45 connector.
l
Use a LAN cable that is Category 5e or higher (Category 6 recommended).
l
Use a LAN cable that is an STP cable.
l
When supplying power via PoE, connect to a PoE-compatible switching hub or a PoE-
compatible network card.
l
Refer to the specifications of the cable for details on its bend radius.
Caution:
See the
topic as well.
➃
Network Card
Install this in the computer that will be used to configure and operate the camera. As the camera
supports PoE, you can also use PoE-compatible network cards. Refer to the instruction manual of the
network card and configure settings on the computer as necessary.
⑤
DC IN / Trigger IN Connection Cable
Performs external I/O such as power supply and trigger input.
⑥
AC Adapter (Power Supply) (If Necessary)
Connect the AC adapter and the round connector of the connection cable to the DC IN / Trigger IN
connector on the camera.