̶
59
̶
GO-2400M-PMCL / GO-2400C-PMCL
Function name
Access
type
Setting range
Min. value
Max. value
Default value
Description
Trigger OverLap
R/O
Off
—
—
Off
Select the trigger
overlap operation.
Trigger Option
R/W
Off
—
—
Off
Select the alternate
trigger modes when
[Exposure Mode] is
set to [Timed].
This is fixed at OFF
on this camera.
Exposure Mode
R/W
Off [Off]
Timed [Timed]
TriggerWidth [Trigger Width]
0
2
Timed
(control via exposure
time)
Select the exposure
mode.
Exposure Time
(us)
R/W
10bit: 15 to 8000000
12bit: 20 to 8000000
15 *
8000000 *
8216
Set the exposure
time.
The maximum value
when Trigger Mode is
OFF varies
depending on the
[Acquisition Frame
Rate Raw] value.
The minimum value
varies depending on
the TapGeometry.
Exposure Auto
R/W
Off
Continuous
—
—
Off
Set whether to enable
auto exposure.
d) Digital IO
Control
Configure settings for
digital input/output.
Line Selector
R/W
Line1 [Line1 - TTL Out]
Line4 [Line4 - TTL In]
Line7 [Line7 - CC1]
Nand0_In_1 [NAND Gate 0 In 1]
Nand0_In_2 [NAND Gate 0 In 2]
Nand1_In_1 [NAND Gate 1 In 1]
Nand1_In_2 [NAND Gate 1 In 2]
—
—
6: CC1
Select the input/
output to configure.
Line1 TTL Out and
Line4 TTL In are
available on Standard
Model.
Line Mode
R/O
Input
Output
—
—
Input
Display the input/
output status
(whether it is input or
output).
Line Inverter
R/W
True, False
—
—
FALSE
Enable/disable
polarity inversion for
the selected input
signal or output
signal.
Line Status
R/O
True, False
—
—
—
Display the status of
the input signal or
output signal (True:
High, False: Low).
LineSource
R/W
Low [Low]
High [High]
FrameTriggerWait [Frame Trigger
Wait]
FrameActive [Frame Active]
ExposureActive [Exposure
Active]
FVAL [FVAL]
LVAL [LVAL]
PulseGenerator0
[PulseGenerator0]
UserOutput0 [User Output 0]
UserOutput1 [User Output 1]
Line4 [Line4 - TTL In]
Line7 [Line7 - CC1]
Nand0 [Nand0 Out]
Nand1 [Nand1 Out]
—
—
Low
Select the line source
signal for the item
selected in [Line
Selector].
Line4 TTL In is
available on Standard
Model.
Line Format
R/O
NoConnect [No Connect]
InternalSignal [Internal Signal]
TTL [TTL]
LVDS [LVDS]
OptoCoupled [Opto Coupled]
—
—
TTL
Display the current I/F
type.
User Output
Selector
R/W
UserOutput0 [User Output 0]
UserOutput1 [User Output 1]
—
—
0: UserOutput0
Set the user output
signal.
