JAI EL-2800C-USB User Manual Download Page 61 | Manualshive

Page: 61 / 73

background image

EL-2800M-USB / EL-2800C-USB

- 59 -

8.7.2 Setting for P-iris lens being used

P-iris lenses use an absolute setting value control system and therefore, if the following
parameters are input, precise iris position control is possible.

8.7.2.1 P-Iris lens select

Select the lens used. At present time, the following two lenses are available for these cameras.

P-Iris lens select

Description

Control step number

Open F value

LM16JC5MM

KOWA 16mm 2/3-inch

74

F1.4

LM35JC5MM

KOWA 35mm 2/3-inch

73

F2.0

8.7.2.2 Step max.

The iris control step depends on the lens. The setting value uses the value stored in the
camera. Refer to the table above for the control step number.

8.7.2.3 Position

The iris position can be set between 0 to Step Max. 0 means to open the iris and Step Max
means to close the iris. The camera initializes P-iris control and acquires iris position under the
following conditions:

1) When the camera is powered

2) When the lens is selected in P-Iris lens select

3) If the lens is changed in P-iris lens select

8.7.2.4 Current F value

The current F value is indicated by using iris position information. This can be indicated during auto
iris operation. The relation between iris position and F value depends on the lens used.

8.7.2.5 P-Iris Auto min. / P-Iris Auto max.

This function can set the control range when the iris is operated automatically. Auto max. sets the
limit when the iris goes open and Auto min. sets the limit when the iris goes closed. Auto max. can
be set to fully open but Auto min. is stopped at F5.6 as lens performance typically degrades if the
iris is closed beyond this point.

8.7.2.6 Auto Iris Lens Control Signal Output

If the auto iris lens is used, this parameter should be ON. This is common for all types of

auto iris

lenses.

8.7.3 Motorized lenses

The EL-2800-CXP can use the 3-axis motorized lens control for zoom, focus and iris. The following
functions are available via the motorized lens commands.

8.7.3.1 Iris

Open: While this command is supplied, the iris will continue to open.

Close: While this command is supplied, the iris will continue to close.

Stop: When this command is supplied, the iris operation stops.

«
...
59
60
61
62
63
...
»

Summary of Contents for EL-2800C-USB










































































Reviews:

No comments

Related manuals for EL-2800C-USB

Brand: Pantech Pages: 87

Brand: iDeaPLAY Pages: 14

Brand: eSYNiC Pages: 5

Brand: Mini Gadgets Pages: 25

Brand: Olympus Pages: 140

Brand: AGFA Pages: 34

Brand: Vivitar Pages: 51

Brand: cycliq Pages: 31

Brand: Leica Pages: 358

Pissarro DPF 70

Brand: Rollei Pages: 9

Brand: Uniden Pages: 2

Basler scout scA640-70gc

Brand: Basler Vision Technologies Pages: 20

Brand: D-Mail Pages: 78

Brand: Magellan Pages: 105

Brand: MISUMI Pages: 15

Brand: Yashica Pages: 9

Brand: V-TAC Pages: 234

Brand: VMS Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands