JAI EL-2800C-USB User Manual Download Page 2 | Manualshive

Page: 2 / 73

background image

EL-2800M-USB / EL-2800C-USB

- 2 -

Notice

T

he material contained in this manual consists of information that is proprietary to JAI Ltd., Japan

and may only be used by the purchasers of the product. JAI Ltd., Japan makes no warranty for the
use of its product and assumes no responsibility for any errors which may appear or for damages
resulting from the use of the information contained herein. JAI Ltd., Japan reserves the right to
make changes without notice.

Company and product names mentioned in this manual are trademarks or registered trademarks of
their respective owners.

Warranty

For information about the warranty, please contact your factory representative.

Certifications

CE compliance

As defined by the Directive 2004/108/EC of the European Parliament and of the Council, EMC
(Electromagnetic compatibility), JAI Ltd., Japan declares that EL-2800M-USB and EL-2800C-USB
comply with the following provisions applying to its standards.

EN 61000-6-3 (Generic emission standard part 1)
EN 61000-6-2 (Generic immunity standard part 1)

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.    These limits are designed to provide reasonable protection
against harmful interference in a residential installation.    This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may  cause  harmful  interference  to  radio  communications.  However,  there  is  no  guarantee  that

interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-

Reorient or relocate the receiving antenna.

-

Increase the separation between the equipment and receiver.

-

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-

Consult the dealer or an experienced radio/TV technician for help.

Warning

Changes or modifications to this unit not expressly approved by the party
responsible for FCC compliance could void the user’s authority to operate the
equipment.

«
1
2
3
4
...
»

Summary of Contents for EL-2800C-USB










































































Reviews:

No comments

Related manuals for EL-2800C-USB

Brand: GE Pages: 115

VENUS USB3 Series

Brand: Daheng Imaging Pages: 5

Brand: Lasonic Pages: 1

Brand: Olympus Pages: 116

Brand: Pentax Pages: 160

Brand: ACTi Pages: 16

Brand: Avermedia Pages: 24

Brand: WolfVision Pages: 20

Brand: JAI Pages: 87

Brand: Displays2go Pages: 25

Brand: Maisi Pages: 16

Brand: Sorama Pages: 41

Brand: Kapture Pages: 32

Brand: IBASE Technology Pages: 46

Brand: Iget Pages: 8

Brand: FOXEER Pages: 2

Brand: 2N Pages: 51

Brand: Rollei Pages: 46

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands