JAI EL-2800C-USB User Manual Download Page 60 | Manualshive

Page: 60 / 73

background image

EL-2800M-USB / EL-2800C-USB

- 58 -

Fig. 46 Blemish compensation

Note: If defective pixels are found consecutively in the horizontal direction, the blemish
compensation circuit does not work.

8.7 Lens

The EL-2800-USB can be used with 4 different types of auto iris lenses, in addition to standard
lenses with manual iris control. If an auto iris function is to be utilized, the lens type used must be
selected in Lens Select.

        Table -28      Lens selector

Lens Select

Description (Control with camera)

Note

P-Iris Lens

1) Iris position can be remotely

controlled manually

2) Auto iris control is also
available

If P-iris lens is used, the
specific model name should
be selected in lens select.

Motor controlled lens

1) Iris position can be remotely

controlled manually

2) Auto iris control is also
available

Video iris lens

Only auto iris control is available

Factory Option
(Use AUX Type 2)

DC iris lens

Only auto iris control is available

Factory Option
(Use AUX Type 2)

8.7.1 About P-Iris

New Elite Series EL-2800M-PMCL and EL-2800C-PMCL come equipped with P-Iris control as part of
the  standard  lens  control  function.  The  P-Iris  system  is  a  newly  developed  lens  control method
designed to control the iris more precisely. Especially for video cameras in surveillance applications
utilizing megapixel CCD or CMOS imagers, it becomes a very important factor to control an iris in
order  to  achieve  the  maximum  camera performance.  In  surveillance  applications, depending  on
shooting conditions, resolution and depth of field are important factors. The iris is deeply related
with these factors. If the iris diaphragm is smaller, but not too small, resolution gets better and the
depth of field is also deeper. The P-Iris system controls the iris diaphragm precisely and maintains
the best image with the highest resolution and depth of field. P-Iris can also combine with gain and
electronic  shutter  to  keep  the  appropriate  iris  position  under  changing  lighting  conditions  (ALC
function).

B/W

Color

Blemish Compensation Principle

Defective Pixel

«
...
58
59
60
61
62
...
»

Summary of Contents for EL-2800C-USB










































































Reviews:

No comments

Related manuals for EL-2800C-USB

Brand: GE Pages: 78

Brand: Uniq Pages: 13

CAMEDIA C-60 Zoom

Brand: Olympus Pages: 2

Brand: Canon Pages: 132

CAMEDIA C-5500 Sport Zoom

Brand: Olympus Pages: 2

FE 370 - Digital Camera - Compact

Brand: Olympus Pages: 70

FE 370 - Digital Camera - Compact

Brand: Olympus Pages: 70

Brand: Olympus Pages: 68

Brand: XENO Pages: 2

Brand: Vivitar Pages: 51

Brand: Santec Pages: 8

Brand: XtendLan Pages: 34

Brand: Bresser Pages: 28

Brand: Concord Camera Pages: 57

Brand: VISIONARY DESIGNS Pages: 2

Brand: Iget Pages: 8

Brand: E-Vision Pages: 28

m-MINI DIGITAL S

Brand: Olympus Pages: 124

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands