JAI CB-200GE User Manual Download Page 7

Page: 7 / 70

CM-200GE/CM-200GE-RA/CB-200GE/CB-200GE-RA

- 5 -

JAI GigE

Vision Camera operation manuals

To understand and operate this JAI GigE

Vision camera properly, JAI provides the following

manuals.

User’s manual (this booklet)

Describes functions and operation of the hardware

JAI SDK & Control Tool User Guide

Describes functions and operation of the Control Tool

JAI SDK Getting Started Guide

Describes the network interface

User’s manual is available at

www.jai.com

JAI SDK & Control Tool User Guide and JAI SDK Getting Started Guide are provided with the JAI

SDK which is available at

www.jai.com

Introduction

GigE

Vision is a standard interface which uses Gigabit Ethernet for machine vision applications. It

was developed primarily by AIA (Automated Imaging Association) members. GigE

Vision is capable

of transmitting large amounts of uncompressed image data through an inexpensive general

purpose LAN cable over long distances.

GigE

Vision also supports the GenICam

standard which is maintained by the EMVA (European

Machine Vision Association). The purpose of the GenICam standard is to provide a common

program interface for various machine vision cameras. By using GenICam, cameras from different

manufactures can seamlessly connect in one platform.

For details about the GigE

Vision standard, please visit the AIA web

site,

www.machinevisiononline.org

and for GenICam, the EMVA web site,

www.genicam.org

JAI GigE

Vision cameras comply with both the GigE

Vision standard and the GenICam standard.

Before using GigE

Vision cameras

All software products described in this manual pertain to the proper use of JAI GigE

Vision cameras.

Product names mentioned in this manual are used only for the explanation of operation.

Registered trademarks or trademarks belong to their manufacturers.

To use the JAI SDK, it is necessary to accept the “Software license agreement” first.

This manual describes necessary equipment and the details of camera functions.

Software installation

The JAI GigE Vision SDK & Control Tool can be downloaded from the JAI web site at

www.jai.com

The JAI SDK is available for Windows XP and Vista, 32-bit and 64-bit.

For the details of software installation, please refer to the “Getting Started Guide” supplied on

the JAI SDK download page.

Summary of Contents for CB-200GE







































































Search results

Summary of Contents for CB-200GE

Reviews:

Related manuals for CB-200GE

Brands by name

Popular brands

JAI CB-200GE, User Manual

Search results

Summary of Contents for CB-200GE

Reviews:

Related manuals for CB-200GE

Brands by name

Popular brands