JAI CB-200GE User Manual Download Page 8

Page: 8 / 70

CM-200GE/CM-200GE-RA/CB-200GE/CB-200GE-RA

- 6 -

Camera operation
1. General

This manual covers the digital monochrome progressive scan camera CM-200GE/CM-

200GE-RA and color progressive scan camera CB-200GE/CB-200GE-RA

The CM-200GE/CM-200GE-RA/CB-200GE/CB-200GE-RA are a GigE Vision compliant camera, based

on the CM-200MCL/CB-200MCL. Both the monochrome version CM-200GE/CM-200GE-RA and the

color version CB-200GE/CB-200GE-RA provide a frame rate of 25 frames/second at full resolution.

Using vertical binning (CM-200GE/CM-200GE-RA only) and partial scan provides higher frame rates.

The 1/1.8" CCD with square pixels offers a superb image quality. The high-speed shutter function

and asynchronous random trigger mode allows the camera to capture high quality images of fast

moving objects.

The color version CB-200GE/CB-200GE-RA, based on CCD sensor with primary RGB Bayer mosaic

filter, outputs raw Bayer images. Host-based color interpolation is required to display or save

color images.

The CM-200GE/CM-200GE-RA/CB-200GE/CB-200GE-RA also comply with the GenICam standard and

contains an internal XML file that is used to describe the functions/features of the camera. For

further information about GigE

Vision standard, please go to

www.machinevisiononline.org

and

about GenICam

, please go to

www.emva.org

As an application programming interface, JAI provides an SDK (Software Development Kit).

This SDK includes a GigEVision Filter Driver, JAI control tool software, documentation and

code examples.

The JAI SDK can be downloaded from

www.jai.com

The latest version of this manual can be downloaded from

www.jai.com

For camera revision history, please contact your local JAI distributor.

2. Camera nomenclature

The standard camera composition consists of the camera main body and C-mount protection cap.

The camera is available in the following versions:

CM-200GE/CM-200GE-RA

Where

C stands for "Compact" family, M stands for "Monochrome", 200 represents the resolution

"2.0 million pixel" ,

GE stands for " GigE Vision " interface and RA

stands for Right Angle type

CB-200GE/CB-200GE-RA

Where

C stands for "Compact" family, B stands for "Bayer mosaic color", 200 represents the

resolution "2.0 million pixel" ,

GE stands for " GigE Vision " interface and RA

stands for Right Angle

type

Summary of Contents for CB-200GE







































































Search results

Summary of Contents for CB-200GE

Reviews:

Related manuals for CB-200GE

Brands by name

Popular brands

JAI CB-200GE, User Manual

Search results

Summary of Contents for CB-200GE

Reviews:

Related manuals for CB-200GE

Brands by name

Popular brands