JAI CB-200GE User Manual Download Page 53

Page: 53 / 70

CM-200GE/CM-200GE-RA/CB-200GE/CB-200GE-RA

- 51 -

11. JAI control tool

In this section, the general operation of the JAI control tool is explained. For more details

regarding the JAI control tool, please refer to the JAI control tool documentation provided

in the JAI SDK.

11.1. About GenICam

SFNC1.3

The CM-200GE and CB-200GE series are now redesigned as conforming to GenICam SFNC1.3.

GenICam SFNC stands for GenICam Standard Features Naming Convention. By defining the

standard cases and the standard features, general-purpose software can control cameras

from any manufacturers which conform to the GenICam standard.

JAI, in the past, used traditional feature names in order to maintain naming continuity

with previous cameras.

However, new revisions of cameras comply with GenICam SFNC

feature names, even though the traditional feature names are still maintained.

Terminologies used for functions will be much different from previous models. This manual

explains the basic operation using feature names specified in the GenICam SFNC 1.3

specification.

The latest version of JAI GigE Vision cameras comply with GenICam SFNC1.3. However, JAI

can offer the following options for customers who use older versions of GIgE Vision

cameras.

JAI provides the following software.

1. Version prior to SFNC 1.3 for older camera version

2. Downgrade to old version from the latest SFNC 1.3 version

Please contact local sales representatives for the details

11.2. JAI SDK Ver.1.3

JAI SDK has also been upgraded to version 1.3.

In a GigE Vision compliant camera, all features are described in the XML file inside the

camera and after connecting JAI Control Tool software, all features are downloaded to

the JAI Control Tool software. If customers use older versions of cameras together with

the Control Tool software ver.1.3, feature properties shown in the Control Tool exhibit

old feature names, enabling customers to operate cameras in a familiar way.

If the latest version of the camera is connected, some traditional JAI feature names such

as JAI Preset Shutter, will display in the Feature Properties in addition to the newer

GenICam SFNC 1.3 names.

These features can be set as usual and settings for those features are reflected

automatically in the GenICam SFNC 1.3 feature names.

The features shown above will vary depending on the specific camera.

Summary of Contents for CB-200GE







































































Search results

Summary of Contents for CB-200GE

Reviews:

Related manuals for CB-200GE

Brands by name

Popular brands

JAI CB-200GE, User Manual

Search results

Summary of Contents for CB-200GE

Reviews:

Related manuals for CB-200GE

Brands by name

Popular brands