JAI AP-3200T-10GE, User Manual, Page: 16 / 75

— 16 —
② Direct connection （ or MP-41 tripod adapter plate ）
When mounting the camera directly to a wall or other device, use screws that
match the camera locking screw holes on the camera (M3, depth: 5 mm).
Use the supplied screws to attach the tripod adapter plate.
For heavy lenses, be sure to support the lens itself. Do not use configurations
in which its weight is supported by the camera.
Caution
Cat5e Cat6/Cat6e Cat6A Cat7
1000Base-T 100m 100m 100m 100m
2.5GBase-T 100m 100m 100m 100m
5GBase-T 100m 100m 100m
10GBase-T 55m 100m 100m
③ LAN cable
Connect a LAN cable to the RJ-45 connector.
・ The camera supports the following Ethernet standards.
(1000Base-T, 2.5GBase-T, 5GBase-T, 10GBase-T)
・ The longest cable length varies depending on the type of LAN cable and the
Ethernet standard. Below, the table shows the relationship diagram between LAN
cable type and Ethernet standard. Correctly select the LAN cable type according to
the Ethernet standard to be used.
■ About the longest cable length
・ Refer to the specifications of the cable for details on its bend radius.
Ethernet standard
LAN cable type
-
-
Secure the locking screws on the connector
manually, and do not use a driver. Do not
secure the screws too tightly. Doing so may
wear down the screw threads on the camera.
(Tightening torque: 0.147 Nm or less)
Secure manually.
Do not secure too tightly.
Caution
AP-3200T-10GE