JAI AP-1600T-PMCL, User Manual, Page: 20 / 145

AP-1600T-PMCL | AP-3200T-PMCL | User Manual (Ver. 2.0) Preparation
- 20 -
① Lens
C-mount lenses with lens mount protrusions of 4 mm or less can be attached.
l
Use a lens designed for three-sensor cameras. Using a lens for single-sensor cameras may
hinder full performance of the camera.
l
See the table below for the diagonal of the camera’s CMOS image sensor. To prevent vignetting
and to obtain the optimal resolution, use a lens that will cover the image sensor size.
Image Sensor
AP-1600T-
PMCL
Type 1/2.9, 6.27 mm diagonal
Some lens manufacturers offer lenses with an 6.27 mm format. If not, a 1/2.9-inch lens is
recommended.
AP-3200T-
PMCL
Type 1/1.8, 8.89 mm diagonal
Some lens manufacturers offer lenses with an 8.89 mm format. If not, a 1/1.8-inch lens is
recommended.
Cautions :
l
The maximum performance of the camera may not be realized depending on the lens.
l
Attaching a lens with a mount protrusion of 4 mm or longer may damage the lens or camera.
Notes:
The following formula can be used to estimate the focal length.
Focal length = WD / (1 + W/w)
WD: Working distance (distance between lens and object)
W: Width of object
w: Width of sensor
② Direct Mounting (or Use MP-44 Tripod Adapter Plate)
When mounting the camera directly to a wall or other device, use screws that match the mounting
holes on the camera. (M3, depth: 3 mm)
Use the supplied screws to attach the tripod adapter plate.