JAI AD-131GE, User Manual

Page: 55 / 92

AD-131GE
54
10.6.2 Continuous mode
For applications not requiring asynchronous external triggering, this mode should be used for
continuous operation. The frame rate is 31fps. If partial scanning is applied, the frame rate will
be faster.
As for the details of timing, refer to section 8.4 Video timing. In this mode, the exposure is
controlled by the electronic shutter.
The following is an example of the settings.
To use this mode
Set function:
Acquisition mode
：
Continuous
Trigger mode
：
OFF
Sync mode
：
Refer to 10.5.4
Exposure Mode
：
Timed
Pixel Format
：
8bit
、
10bit
、
12bit
Other functions
10.6.3 Trigger operation with pre-select exposure time (EPS)
An external trigger pulse initiates the capture, and the exposure time (accumulation time) is
the fixed shutter speed set by registers. The exposure time can be set from 0L to 982L in 1 LVAL
steps. The accumulation can be LVAL synchronous or LVAL asynchronous. The resulting video
signal will start to be read out after the selected shutter time. For the details of timing, refer
to section 8.4 Video timing and fig. 40 to fig.43.
To use this mode:
Set function:
Acquisition mode
：
Frame Start
Trigger mode
：
ON
Sync mode
：
Refer to 10.5.4
Exposure Mode
：
Timed
Exposure time
：
Exposure time/Exposure time(us)/
Exposure time(Raw)
Other functions
Input: External Trigger Trigger Source
This function can be set by selecting Edge pre-select in Exposure mode of JAI Acquisition Control.
However, Acquisition Mode,
Sync Mode, Exposure Time, and so on should be set.