JAI AD-131GE, User Manual

Page: 56 / 92

AD-131GE
55
Important Note:
The trigger minimum active period is 2L and the minimum interval of the trigger is shown
below.
SYNC Mode Smearless
Enable
Minimum trigger interval (Line)
SYNC
Mode=
SYNC False LVAL
ASYNC Frame interval in continuous ope Larger
Exposure Time(Raw) between camera #0 and camera
#1 + 5L
LVAL
SYNC
①
If Exposure Time(Raw) range is 3L to (Frame
interval in continuous operation(L) - 1L)
Frame interval in continuous ope
Difference between camera #0 and camera #1 +
5L
②
If JAI Partial Scan is set at True and Exposure
Time(Raw) range is Frame interval in continuous
operation(L) to 982L
Frame interval in continuous operation(L)
+(Difference between camera #0 and camera #1
exposure time
）
+ 5L + ( Smaller exposure time
between camera #0 and camera #1 - Frame interval in
continuous operation(L) + 1L)
True LVAL
ASYNC Smear less period[196L]+ 1 + (Larger exposure time
between camera #0 and camera #1
）
+ Frame interval
in continuous operation(L) + 6L
SYNC
Mode=
ASYNC False LVAL
ASYNC Frame interval in continuous operation(L) + Exposure
Time(Raw) + 5L
LVAL
SYNC
①
If Exposure Time(Raw) range is 3L to (Frame
interval in continuous operation(L) - 1L)
Frame interval in continuous operation(L) + 5L
②
If JAI Partial Scan is set to True and Exposure
Time(Raw) range is Frame interval in continuous
operation (L) to 982
Frame interval in continuous operation(L) + Exposure
Time(Raw)
–
Frame interval in continuous
operation(L) + 6L
True LVAL
ASYNC Smearless period[196L]+ 1 +Exposure Time(Raw)+
Frame interval in continuous operation (L)+ 6L
1) LVAL SYNC/ASYNC can be selected automatically.
2) Frame interval of full frame in continuous operation is 982L and if JAI partial scan is set
to True, please refer to 8.4.3 Partial Scan Vertical Timing for the frame interval.
3) If Smearless Enable is set to True, only LVAL Async is available.