JAI AD-081GE, User Manual

Page: 8 / 82

AD-081GE
7
3. Main Features

C3 Advanced series progressive scan camera

GigE Vision, GenICam compliant

2-channel monochrome CCDs are employed by using prism optics

Two RJ-45 connectors equipped for output from each CCD respectively

1/3” progressive scan IT CCDs with 1024 (h) x 768 (v) active pixels

4.65 μm square pixels

12- or 10- or 8-bit output

30 fps with full resolution at normal mode and 60 fps for high frame rate mode

Variable partial scan is available with user-definable height and starting line

Programmable exposure from 0.5L(20μs) to 792L(33ms)

Edge Pre-select, Pulse Width Control ,Reset Continuous and PIV trigger modes

Sequence trigger mode for on-the–fly change of gain, exposure and ROI

Delayed readout mode for smooth transmission of multi-camera applications

Smearless mode available

Blemish compensation circuit built-in

Shading compensation circuit built in

LUT (Look Up Table) for various gamma corrections

Knee point and Knee slope can be adjusted

AGC (Automatic Gain Control) from -3dB to 21dB

LVAL synchronous/asynchronous operation (auto-detect)

Auto-iris lens video output for lens control

Programmable GPIO with opto-isolated inputs and outputs

Comprehensive software tools and SDK for Windows XP/Vista (32 bit “x86” and 64
bit “x64” JAI SDK Ver. 1.2.1 and after )