JAI AB-800CL User Manual Download | Manualshive

Page: 55 / 68

background image

AM-800CL / AB-800CL

- 53 -

10. Camera control tool

The AM-800CL and AB-800CL camera Control Tool can be downloaded from JAI Web
site

www.jai.com

. This control software is available for Windows2000/XP/Vista/7.

In this control tool, the developers guide is included in order for customers to
create their own programs.

10.1. Control tool windows

Here is some practical information about the Camera Control Tool:

1. The Camera Control Tool bar is always on top of other windows.

2. When you minimize the Camera Control Tool bar all open windows will close.

3. It is possible to work with the Camera Control Tool when the camera is online and
when the camera is offline.

4. The newer JAI cameras always start up with the last used user area (but for some old
models it will start up with the last saved user area.)

5. The Camera Control Tool saves the last used settings (not the user area), which don‟t
have to be the same as for the last saved user area.

6. The setup file ‟CameraName.ini‟ stores all information about camera settings. When
the program is started the last settings for the program are loaded from the
file ‟CameraName.ini‟

10.2. Camera Control Tool interface

The Camera Control software consists of the main tool bar and
associated tool windows. When each icon in the main tool bar
is clicked, the associated window will open. The program is

refreshed after reboot.
The Camera control tool includes an About Window, Communication Window and Camera Control
Window.

10.2.1 About Window

  The  About  Window  contains  a  picture  of  the
camera  and  information  about  the  version  of
the  program,  Internet  connection  to  JAI  A/S
and access to the help documents.
The List box that contains the help documents
will list all files, which have the extension .pdf
and  that  are  found  in  the  program  (default)
folder
It  is  possible  to  download  updated  operation
manuals from the jai website:

http://www.jai.com

The  About  Window  also  shows  Model  Name,
Camera ID and User ID. It is possible to edit and
save free text in User ID.

At the bottom of the windows (all windows but
the Communication Window is a colored bar. The bar is red when the Camera Control Tool is not
connected to a camera or when the camera is turned off. The bar is green when the Camera Control

«
...
53
54
55
56
57
...
»

Summary of Contents for AB-800CL





































































Reviews:

No comments

Related manuals for AB-800CL

Brand: TPG Pages: 6

Brand: ACME Pages: 4

Brand: Convision Pages: 24

IPC-HUM4231S-L4-0280B-S3

Brand: Dahua Technology Pages: 14

Brand: Vivitar Pages: 2

Brand: Vivitar Pages: 70

Brand: Axis Pages: 42

Brand: Kaya Instruments Pages: 49

Brand: Zadro Pages: 8

DH-IPC-HUM4231S-L5

Brand: Dahua Technology Pages: 15

Brand: ZIGBEE Pages: 5

Brand: DSE Pages: 2

Brand: Amcrest Pages: 67

RS-CH772H1B-36-RF

Brand: Zhuhai RaySharp Technology Pages: 27

FS-613A F Series

Brand: EasyN Pages: 52

Brand: Qcam Pages: 4

Brand: J-TECH Pages: 44

LBV2561U Series

Brand: Lorex Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands