![background image](http://html.mh-extra.com/html/jai/ab-800cl/ab-800cl_user-manual_631428017.webp)
AM-800CL / AB-800CL
- 15 -
Fig. 8 Iris video output signal
5.3.2 Trigger input
An external trigger input can be applied to pin#10 of
the 12-pin Hirose connector (when the command TI=1
has been set). The input is AC coupled. To allow long
pulses the input circuit is designed as a flip-flop
circuit. The leading and trailing edges of the trigger
pulse activate the circuit.
The trigger polarity can be changed by TA(Trigger
Activation).
Trigger input level is 4 V
2 V.
Trigger can also be applied through the Camera Link
connector, when the command TI=0 has been sent.
Fig.9 Trigger input circuit
5.3.3 XEEN output
XEEN is on pin#9 of the 12-pin Hirose connector.
The output uses either a complementary
emitter follower circuit or open-collector.
The output of the complementary emitter
follower circuit is
3 V (no termination).
When the open collector output is used, the
maximum current is 120mA. However, if the
current is more than 50mA, use thicker cable
for connecting pins #8 and #9. If a thinner
cable is used, it might cause a malfunction
due to the resistance of the cable.
The output can be selected by switch SW500
located inside the camera (trigger IF board).
EEN is also found in Camera Link.
Fig.10 XEEN output from Hirse-12pin
○
+5
V
+5
V
Trigger INI B
Trigger INI A
1000
0.1
μ
Trigger
IN
0.1
μ
1K
1K
22K
15K
3K
100K
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
○
XEEN
Open
Collector
TTL
SW500
EEN
150
120
10
10
10K
220
0.1
μ
180
1K
1K
100
10K
0.1
μ
+5V
+5V