Tool change
Item no. 10205032, Revision 00
26 ( 36 )
Ü
To prevent the clamping nut from loosening, tighten it again after a short
period of operation and when the shaft is at a standstill.
10.1.1
Maximum tightening torques
Short clamping bore
Continuous clamping bore
Excessive tightening torques (M
A
) can damage or destroy the collet, clamping
nut, and collet mount of the shaft.
Keep to the following values.
Ü
Short clamping bore
Ä
Clamping diameter: 1,0 - 6,5 mm
Ä
Ma max.: 24 Nm
Ü
Continuous clamping bore
Ä
Clamping diameter: 7,0 - 16,0 mm
Ä
Ma max.: 40 Nm
