V03
JCAII
18
8-7Quantity check
8-7-1 Set the high limit of quantity
1. Press under normal weighing mode. The last high limit value of quantity is blinking in the
Total Count window while the arrow is pointing at
HI
. (If the value in Total Count window is not
blinking , press )
Eg. 111pieces.
2. Use numeric key to input the high limit of quantity you want.
3. Press to save and return.
8-7-2 Set the low limit of quantity
1. Press under normal weighing mode. The last low limit value of quantity is blinking in the
Total Count window while the arrow is pointing at
LO
. (If the value in Total Count window is not
blinking, press )
Eg. 111pieces.
2. Use numeric key to input the low limit of quantity you want.
3. Press to save and return.
8-7-3 Enable / Disable the quantity check function
1. Under normal weighing mode, press or . The display in the Total Count window is
blinking. (If the value in Total Count window is not blinking press )
2. If you want to enable the function, press
If you want to disable the function, press
Note:
When the
HI & LO
checking function is enabled, there will be an arrow pointing between
PERSET TARE
and
NET.
8-8 Weight check
8-8-1Set the high limit of weight
1. Press under normal weighing mode. The display of the weight is blinking in the Weight
