V03
JCAII
17
8-6 Serial number
8-6-1 Set Serial Number Mode
Note: The weight should be less than 20e and there is no accumulation data.
1. Under normal weighing mode, press . It will show as
(If not, press ). Scale would appear the accumulation data, if there is acc record. Delete
the acc data firstly, then set the serial number function.
2. Press or to choose the serial number mode
=No action
= The serial no. plus 1 when
symbol appear.
=The serial no. plus 1 when quantity is between HI-LO limits
=The serial no. plus 1 when weight is between HI-LO limits.
3. Press to save and return.
8-6-2 Set Max Serial Number
The max serial number is 9999, but you can change the max serial number as shown below.
For example: if you want to change the max serial number to 9, do as the following.
1. Press and the Unit Weight display is blinking.
2. Press to save and return.
Note
: When the serial number reaches the max, the Unit Weight display will flash
and
beep for 3 seconds and then return to normal weighing mode.
And because it has reached the max serial number, it will reset to 1 when the serial number do
increase 1.
8-6-3 Change the Current Serial Number
For example: if you want to change the serial number to 9, do as the following.
1. Press and the Unit Weight display is blinking.
2. Press to save and return.
Note:
the serial number is starting from 9.
