22
7.
Set Swim Spa To Heat
To warm swim spa water to a comfortable temperature, follow these steps:
The display on the control panel displays the actual temperature of the swim spa
water. Tap the “+” or “-” to increase or decrease the water temperature in 1 degree
increments.
The heater will turn off 1oF (0.5
o
C) above the set temperature and turn on 2oF (1
o
C)
below set temperature.
Note: The temperature range for the swim spa is 65 to 104
o
F (18.33 to 40
o
C). To ac vate the
Extended Temperature feature that allows the swim spa to reach 106
o
F (41
o
C) refer to Sec-
on 15 “Error/Display Messages”.
Important Heater Details:
The maximum temperature for which the swim spa can be set is 104
o
F (40
o
C) and the
minimum is 80
o
F (27
o
C).
Se ng the thermostat at maximum will not accelerate the hea ng process. This will only
result in a higher ul mate temperature.
The heater operates un l the water reaches 1 degree above the programmed “set tem-
perature”, then turns off. The heater will reac vate a er the water cools to approximate-
ly 2
o
F (1
o
C) below the “set temperature”.
8.
Place Cover On Swim Spa
Keeping the insula ng cover in place any me the swim spa is not in use will reduce
the me required for hea ng, thereby minimizing opera ng costs.
The me required for ini al heat
-
up will vary depending on the star ng tempera-
ture.
DANGER:
RISK OF PERSONAL INJURY.
Check water temperature carefully before entering swim spa! Excessive water temperature
can cause burns, welts and body temperature to rise, hyperthermia (over-
hea ng).
