20
7.0 Power Requirements
Jacuzzi® swim spas are designed to provide op mum performance and flexibility of use when
connected to their maximum electrical service. They are configured at the factory. The most
common electrical connec ons are listed below.
EUROPEAN MODELS (50 Hz)
VOLTAGE
230VAC/28A
MAX CURRENT DRAW
J3000™
28
J4000™
28
Frequency (Hz)
50
Number of wires
3
8.0 Swim Spa Fill Up Procedure
For best results, read each step in its en rety before proceeding with this procedure. Make
sure that all drains and drain plugs are closed.
1.
Prepare the Swim Spa for Filling
Clear all debris from the swim spa (Although the swim spa shell has been polished
at the factory, you may want to treat it with a specially formulated spa cleaner.)
Consult your authorized Jacuzzi dealer for addi onal informa on prior to filling.
Remove both filters, skimmer, polishing filter lids and filters as illustrated in sec on
13.1.
2.
Fill Swim Spa
Place the end of your garden hose into empty skimming filter fi ng as you stand
next to the swim spa. Fill swim spa half way, then place the garden hose into the op-
posite filter fi ng while adding the remaining fill water.
CAUTION:
TO DECREASE BUILD UP ON COMPONENTS AND MINIMIZE ACRYLIC DAMAGE.
Never fill with water from a water so ener. If your water is extremely “hard”, it is
preferable to fill half
-
way with hard water and the rest of the way with so ened wa-
ter. Water that is too so can be corrosive to metal components.
