Part II: Operating Instructions for J-Dream
(X) - Diverter
(Y) - Mixer
Electronic
functions
Hand
shower
Outlet
under
seat
T
o Start Any Functio
n
A. Turn the diverter knob (X) to the outlet under seat
position and open the waterflow by pulling the mixer lever
(Y). Then adjust water temperature by turning the mixer lever
while checking the water temperature with your foot.
B. Turn the diverter knob (X) to the electronic functions
position to close the water outlet under seat.
FIGURE 1
12
11
10
9
ON/OFF buttons
for the jet groups
Turbo-massage
start button (6)
Shower start
button (5)
Waterfall start
button (4)
Steam program
start button (1)
(2)
(3)
(8)
(7)
steam
operating time
Cycle
speed
Steam low
water
indicator (13)
Control Panel
System control is provided by the electronic display located inside the shower cabin (see Figure 1)
The display is used to start up the four functions of the unit: the shower, the cascade waterfall, the hydromassage, and
the steam bath. The display is composed of four distinct areas with clear symbols to identify the four main functions.
FIGURE 2
Shower
To start the shower, carry out the preliminary operations A and B to start any function and then proceed to Step C.
C. Press the shower button 5 on the display (Figure 1). To stop the shower, press the same button again. The green
light above 5 lights when the function starts and turns off when it stops. If there is a power failure after the preliminary
start operations A and B, the mixer can be used to control the shower manually.
Cascade
This feature offers the pleasant sensation of a waterfall lapping over your shoulders and body as you are comfortably
seated. To start the cascade, carry out the preli minary operations A and B to start any function and then proceed to
Step D.
D. Press the cascade button 4 on the display (Figure 1) to automatically start water delivery from the nozzles above
the seats. To stop the cascade, press the same button again. The green light above the button turns off when it stops.
28
