49
Tap
to confirm and save your changes.
When the timer expires, a message will appear on the control
panel display. The CLEARRAY UV bulb
must be replaced
and the timer must be reset. Tap “reset” and follow the instruc-
tions above to reset the timer. If you tap “snooze” the message
will clear but the error icon (
)
will display and the reminder
screen will reappear in 10 days.
Programming the ProClarity/ProClear Filter Timer
A programmable filter timer can be set to remind you when to
clean or replace the filters and skimmer bag.
When you enter the “Water Care” Menu, tap (
)
or (
)
until
you reach the “ProClarity” option.
Slide your finger up and down to roll the days scroll wheel to
adjust the number of days from 0 to 180. The adjustments are
made in increments of 10 days.
Note:
The days are store in memory if the power is interrup-
ted.
Note: to ensure the appliance works correctly, do not
deactivate this function; program it as specified.
Tap
to confirm and save your changes.
When the timer expires, a message will appear on the control
panel display. The filters must be cleaned or replaced. Follow
the instructions above to reset the timer. If you tap “snooze” the
message will clear but the error icon (
)
will display and the
reminder screen will reappear in 10 days. Refer to section
“Cleaning the Filter Cartridges” for cleaning instructions.
Programming the ProClarity Depth Filter Timer
A programmable filter timer can be set to remind you when to
replace the ProClarity Depth Filter.
When you enter the “Water Care” Menu, tap
or
until you
reach the “ProClarity Depth” option.
Slide your finger up and down to roll the days scroll wheel to
adjust the number of days from 0 to 90. The adjustments are
made in increments of 10 days.
Note:
The days are store in memory if the power is interrup-
ted.
Note: to ensure the appliance works correctly, do not
deactivate this function; program it as specified.
Tap
to confirm and save your changes.
When the timer expires, a message will appear on the control
panel display. Follow the previous instructions to reset the ti-
mer. The filter must be replaced. Refer to section “Cleaning the
Filter Cartridges” for filter location. If you tap “snooze” the mes-
sage will clear but the error icon (
)
will display and the re-
minder screen will reappear in 10 days.
Programming the Water Change Timer
A programmable “Water Refresh” reminder can be set to re-
mind you when to drain and refill the spa.
While in the “Water Care” Menu, tap (
)
or (
)
until you
reach the “Water Change” option.
Slide your finger up and down to roll the days scroll wheel to
adjust the number of days from 0 to 180. The adjustments are
made in increments of 30 days.
Note:
The days are store in memory if the power is interrup-
ted
.
Note: to ensure the appliance works correctly, do not
deactivate this function; program it as specified.
Tap
to confirm and save your changes.
When the timer expires, a message will appear on the control
panel display. The water must be drained and replaced with
fresh water. Follow the instructions above to reset the timer. If
you tap “snooze” the message will clear but the error icon will
display and the reminder screen will reappear in 10 days. Refer
to section “Cleaning the Filter Cartridges” for filter location.
Locking the Spa
From the “Settings” menu, tap (
)
next to “Lock” to enter the
programming options. You can prevent users from changing
certain features of the spa. When a lock feature is active, the
lock icon (
)
will appear of the status bar. When you enter the
“Lock” menu, if one of the three settings is active, it will be hi-
ghlighted orange.
Temp Lock:
Tap
to lock.
Use the scroll wheel
to assign a 4-digit lock and unlock
code by sliding your finger to change the numbers.
- Press
to activate the lock.
The adjust temperature feature is disabled, but the spa will still
perform all scheduled tasks.
- Press
to activate the lock.
Spa Lock:
Tap
to lock.
Use the scroll wheel
to assign a 4-digit lock and unlock
code by sliding your finger to change the numbers.
Set
Water Care
set to
180
0 days
Set
>
ProClarity
>
It’s time to clean or replace your ProClarity
and ProClear filters. Contact your autho-
rized dealer if new filters are needed.
Reminder
reset
snooze
>
>
Set
Water Care
set to
90
0 days
ProClarity Depth
>
Set
>
It’s time to replace your ProClarity Depth
Filter. Contact your authorized dealer for a
new filter.
Reminder
reset
snooze
>
>
Set
Water Care
set to
180
0 days
Water refresh
>
Set
>
Your spa needs to be drained and refilled
with fresh water. Refer to your owner’s
manual for draining procedure.
Reminder
reset
snooze
>
>
Set
>
Time & Date
Language
Lock
SETTINGS
>
>
>
LOCK
0000
set lock level
lock
unlock
temp
spa
service
Temp
0000
lock
Spa
0000
Summary of Contents for J-500 Series
Page 2: ......
Page 3: ...Italiano Avvertenze 4 English Warnings 32 Fran ais Recommandations 59 Index...
Page 90: ...90...
Page 91: ...91...