manualshive.com logo in svg

Jacuzzi J - 495, Owner'S Manual, Page: 83 / 96

Share
Download
Jacuzzi J - 495 Owner'S Manual Download Page 83

Page 77

J-400

17. Panel Com Error: The topside controller is having trouble 

communicating to your spa. Contact your authorized dealer or 

service organization.

18. Stereo Com Error: The stereo is having trouble communicating to 

your spa. Contact your authorized dealer or service organization.

19. Wi-Fi Com Error: The Wi-Fi module is having trouble communicating 

to your spa. Contact your authorized dealer or service organization.

20. CLEAR

RAY

 Replacement Reminder: This message 

will appear when the CLEAR

RAY

 bulb reminder time 

has expired (Figure 15.0d). The CLEAR

RAY

 bulb 

must be replaced.

21. ProClarity/ProClear Filter Reminder: This message 

will appear when the filter reminder time has expired 

(Figure 15.0e). Remove the ProClarity/Proclear filters 

and filter/debris bag for cleaning or replacement.

 

22. ProClarity Depth Filter Reminder: This message 

will appear when the filter reminder time has 

expired (Figure 15.0f). The ProClarity Depth filter 

must be replaced.

23. Water Refresh Reminder: This message will appear 

when the “Water Refresh” timer has expired (Figure 

15.0g). The water needs to be drained and refilled 

with fresh water.

24. Extended Temperature Activated: The spa is set to go 

up to 104°F (40°C), but it can be set to reach 106°F 

(41°C). To access the extended temperature you 

need press and hold your finger over the temperature 

reading for about 5 seconds. The temperature reading will start to 

blink to indicate the system is ready. Tap 

 to raise the temperature 

up to 106°F (41°C).

Note:

 The heater icon   will be blinking to indicate that the feature is 

active.

WARNING:

  RISK OF HYPERTHERMIA (OVER-HEATING) 

CAUSING SEVERE INJURY, BURNS, WELTS OR DEATH!

Water temperature in excess of 104°F (40°C) may be injurious 

to your health.

 

!

Reminder

It’s time to replace your 

CLEARRAY bulb. Contact 

your authorized dealer for 

replacement parts.

snooze

reset

Figure 15.0d

Reminder

It’s time to clean or replace 

your ProClarity and Pro-

Clear filters. Contact your 

authorized dealer if new 

filters are needed.

snooze

reset

Figure 15.0e

Reminder

It’s time to replace your 

ProClarity Depth filter. 

Contact your authorized 

dealer for a new filter.

snooze

reset

Figure 15.0f

Reminder

This is a general 

reminder. Please change 

your water soon.

snooze

reset

Figure 15.0g

Summary of Contents for J - 495

































































































Reviews:

No comments